Table of Contents
Advertisement
DISPLAYING 'HIDDEN' NUMBERS
The phone will display up to 16 digits at a time. If you
enter a number longer than this, the first digits will
disappear off the side of the display. If you type more
than 32 digits, the first digits will be lost.
To view the 'hidden' digits press and hold RCL.
To view the original display again, release RCL.
Having displayed a long number, remember to clear
the display (press and hold CLR) before attempting
to recall information from a memory location (as the
RCL key is dual function, and will not recall memory
locations while a number longer than 16 digits is
being displayed).
CLEARING THE CONTENTS OF A
MEMORY LOCATION
NOTE: Once deleted, the contents of a memory
location cannot be recalled.
Press and hold CLR to clear the display.
Press STO. The message STORE prompts you to
specify a memory location number.
Enter the number of the memory location you want
to delete. The message REPLACE CONTENT?
will appear.
Press STO (within 8 seconds). The message
STORED and the memory location number will
be displayed briefly, confirming that the memory
location has been cleared. If you do not press
STO within 8 seconds, or if you press CLR, the
message STORE NOT DONE will be displayed,
and the contents of the location will not be cleared.
MOVING THE CONTENTS OF A MEMORY
LOCATION
You may move the name and number stored in one
location to any empty location. If you attempt to move
the contents of a location which contains only a num-
ber (i.e. the name part is empty), the number will be
copied, rather than moved.
25
Advertisement
Table of Contents
