Panel Facilities And Specifications; Front Panel - Pioneer VSX-D810S Service Manual

8. PANEL FACILITIES AND SPECIFICATIONS

8.1 PANEL FACILITIES

Front Panel

1
2
) (
1 STANDBY indicator
Lights when the receiver is in standby mode (note that
the receiver consumes a small amount of power (1W) in
standby mode).
2 — OFF/ _ ON (Main power) button
If the button is OFF (—), the power of the receiver is shut
off and the
STANDBY/ON
button on the remote control do not
RECEIVER
function. Pressing the button again will turn the receiver
ON (_) and the receiver enters the standby mode. In the
standby mode, you can turn on the receiver using
button on the receiver or the
STANDBY/ON
button on the remote control.
STANDBY/ON button
Switches the receiver between on and standby (note that
the receiver consumes a small amount of power (1W) in
standby mode).
3 STATION (+/–) buttons
Selects station memories when using the tuner.
4 TUNING (+/–) buttons
Selects the frequency when using the tuner.
5 DIRECT button
Use to switch DIRECT playback on or off. This mode
bypasses the tone controls, channel levels, 2/DTS and
DSP modes for the most accurate reproduction of a
program source.
6 MONITOR button
Press to switch tape monitoring on/off.
7 DIGITAL NR button
Switches the DIGITAL NR on or off. To reduce
extraneous noise switch on DIGITAL NR.
3 4 5
N∫m-Û˘,?∫
* & ^ % $
button on the receiver or the
RECEIVER
7
6 8
9
0 -
@
#
8 DSP MODE button
Use to switch between the various DSP modes available
(
HALL1, HALL 2, JAZZ, DANCE, THEATER1, THEATER 2, 5/
) and
6CH STEREO DSP off
different surround sound effects from any stereo source.
9 Remote sensor
Receives the signals from the remote control.
0 SIGNAL SELECT button
Use to select an analog or digital or AUTO signal.
- 2/DTS button
Use to switch between the various 2/DTS surround
modes.
= TONE button
This button allows you to activate the BASS & TREBLE
controls. To adjust the BASS and/or TREBLE use the
MULTI JOG dial. Tone can only be used in 2 channel
stereo sound mode. The tone controls have no effect on
the B speaker system.
~ MULTI JOG dial
You can use this dial for two purposes. Firstly, in normal
mode turn it to select a source component. Secondly, use
it to adjust the BASS and/or TREBLE levels when the
TONE button has been activated (as explained above).
! MASTER VOLUME
Use to set the overall listening volume.
@ VIDEO INPUT jacks
Connect a video camera, video game system, etc. to the
jacks.
VIDEO INPUT
# MIDNIGHT button
Use when listening to movie soundtracks at low volume.
This feature will enable you to hear quiet sounds and not
get jolted by loud or sudden sound effects.
VSX-D810S
= ~
1
!
. Use this button to create
73