ENGLISH ® SDS MAX COMBINATION HAMMERS D25711, D25712, D25713, D25762, D25763 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make WALT one of the most reliable partners for professional power tool users. Technical Data D25711 D25712...
ENGLISH An estimation of the level of exposure to General Power Tool Safety Warnings vibration should also take into account the times when the tool is switched off WARNING! Read all safety warnings or when it is running but not actually and instructions.
Page 9
ENGLISH Do not abuse the cord. Never use the If devices are provided for the connection cord for carrying, pulling or unplugging of dust extraction and collection facilities, the power tool. Keep cord away from ensure these are connected and properly heat, oil, sharp edges or moving parts.
ENGLISH 5) SERVICE Clutch Setting 80 Nm is designed for Have your power tool serviced by a higher torque applications qualified repair person using only identical replacement parts. This will ensure that the Red service indicator LED. For detailed safety of the power tool is maintained. description see under Service Indicator Additional Safety Instructions for LED's.
ENGLISH e. Active vibration control Torque Limiting Clutch f. Mode selector switch The torque limiting clutch reduces the maximum torque reaction transmitted to the operator in case of g. Electronic speed and impact control dial jamming of a drill bit. This feature also prevents the h.
ENGLISH Fully Vibration-dampened Main D25711, D25712, D25713, D25762, D25763 Handle (fi g. 1) MOUNTING IN FRONT POSITION (FIG. 2A) The dampers in the side handle (c) absorb the 1. Snap the steel ring (k) over the collar (o) vibrations transmitted to the user. This improves user behind the tool holder (m).
ENGLISH Move the torque control lever (t) to setting 40 Nm or Selecting the Operating Mode 80 Nm as needed for application. (fi g. 1) Clutch Setting 40 Nm (u) is designed Hammerdrilling: for most drilling applications and is D25711, D25712, D25713, D25762, D25763 designed to easily clutch out when the for concrete, brick, stone and masonry drill bit encounters re-bar or other foreign...
ENGLISH Proper Hand Position (fi g. 6) 7. Always switch off the tool when work is finished and before unplugging. WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown. Drilling with a Core Bit (fi g. 1) WARNING: To reduce the risk of 1.
ENGLISH Optional Accessories WARNING: To reduce the risk of injury, turn unit off and disconnect WARNING: Since accessories, other machine from power source before than those offered by D WALT, have installing and removing accessories, not been tested with this product, use before adjusting or changing set- of such accessories with this tool could ups or when making repairs.