Control Panel - Electrolux ESL 43020 User Manual

4 electrolux

Control panel

1 On/off button
2 Programme selection / cancel button (PROG./CANCEL)
3 Indicator lights
4 Programme lights
Programme lights A and B
In addition to the selection of the corre-
sponding washing programme, these lights
will also guide you in the following operations:
– setting the water softener level,
– deactivating/activating the audible signals.
Setting mode
Press the on/off button; if all programme in-
dicator lights are off and the end of pro-
gramme indicator light is flashing, the appli-
ance is in setting mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– deactivating/activating the audible
signals,
the appliance must be in setting mode.
Press the on/off button; if a programme in-
dicator light is on with a fixed light, the last
Indicator lights
End of programme
Comes on when a washing programme has ended. It also has added func-
tions of visual signalling as:
– the setting of the water softener,
– deactivation/activation of the audible signals,
– intervention of an alarm due to malfunction of the appliance.
Salt
Comes on when the special salt has run out.
performed or selected programme is still set.
In this case, to return to setting mode the
programme has to be cancelled.
To cancel a set programme or a
programme in progress
Press and hold, for about 3 seconds, the
programme selection/cancel button until the
end of programme indicator light is flashing.
The programme has been cancelled and the
appliance is now in setting mode.
Audible signals
Audible signals have been introduced to help
indicate which operations the appliance is
performing:
– end of the washing programme,
– intervention of an alarm due to malfunction
of the appliance.
Factory setting: audible signals activated
It is possible to deactivate the audible
signals.