Table of Contents
Advertisement
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
Safety
Instructions.
To connect your monitor to the computer:
1
Turn off your computer.
2 Connect the HDMI/mDP-DP/USB cable from your monitor to
the computer. (Vertically extend and tilt the monitor completely to rotate it for
cable connection. See Pivoting.)
3 Switch on your monitor.
4 Select the correct input source at Monitor OSD Menu and turn on your
computer.
NOTE: U2717DA default setting is DP 1.2. DP 1.1 Graphic card may not display
normally. Please refer to
connection to the
Connecting the HDMI cable(Optional)
Connecting the DP (or mDP) cable
NOTE: Default is DP port. Select input source on monitor to switch to mDP.
34
|
Setting Up the Monitor
"product specific problems – No image when using DP
PC" to change default setting.
Advertisement
Table of Contents
