Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Episode ES-SNDBR-2.1-BLK
Summary of Contents for Episode ES-SNDBR-2.1-BLK
- Page 1 INSTALLATION MANUAL ES-SNDBR-2.1-BLK...
- Page 2 page | 2 The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
- Page 3 This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. © 2015 Episode® © 2015 Episode®...
- Page 4 | 4 INTRODUCTION Thank you for purchasing Episode® speakers. To complete installation, follow these instructions. Visit our website for design recommendations and speaker calculators. CONTENTS • 1x Soundbar • 1x RCA cable • 1x Wall bracket • 1x Subwoofer •...
-
Page 5: Status Led
C. Input 1 - Toslink Optical H. Mute IN 1 IN 2 Output D. Bluetooth Input No volume E. Input 2 - RCA Line level EQ ON input Volume Up J. EQ OFF Increase volume level © 2015 Episode® © 2015 Episode®... - Page 6 Installing on a Flat Panel Mount The Episode 2.1 Soundbar can be mounted directly to a Flat Panel Mount with the Strong™ SM-SBAR-BKT (available separately). Using the Flat Panel mount bracket allows the Soundbar to move with the TV when mounted to articulating arm mounts.
- Page 7 2. Access the bluetooth pairing menu on the device to be paired to the soundbar, 3. Select “Episode 2.1 Soundbar“. 4. Wait until the device display reads “Connected”. 5. Select the audio output options, and select the “Episode 2.1 Soundbar”. Note: Changing inputs requires device reconnection. Sub to Soundbar Pairing Turn both units on, then press and hold both hidden buttons using a push pin or other fine point until the subwoofer powers on (Blue LED).
-
Page 8: Specifications
WARRANTY 10/2-Year Limited Warranty Episode® Active Products have a 2-Year Limited Warranty for amplifiers and a 10-year warranty for all other components. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified or disassembled.
Need help?
Do you have a question about the ES-SNDBR-2.1-BLK and is the answer not in the manual?
Questions and answers