3 7 63 1515 0
8. PANEL FACILITIES AND SPECFICATIONS
8.1 PANEL FACILITIES
1 Disc Loading Tray
Open the loading tray by pressing the eject button, then place a CD or DVD disc into the slit with the label facing up.
Press the eject button or push the front part of tray to load the tray with the disc.
2 Headphone Jack (PHONES)
Stereo mini jack for head-phone.
Set "Volume Control Knob" minimum position before inserting headphone jack.
The audio output of rear panel is active even when a jack is inserted into the headphone plug.
3 Volume Control Knob
This is the volume control knob for adjusting sound level on the headphone.
When the knob is turned to the right, the headphone volume goes up, when turned to the left, the volume goes down.
4 Ventilation Holes
Do not block this part.
5 DISC Indicator
Lights when a disc has been inserted.
When tray is opened or closed
Read only disc
6 READ/WRITE Indicator
Operation status is indicated as follows.
When an error occurs
• Abnormal rise of internal temp
• Lens or disc dirty
• Other error
7 Eject Button (0)
To unload /load the disc, press the button.
8 Forced Ejection Hole
Insert a stiff rod into the hole and push to eject the tray when the tray doesn't unload by pressing the Eject button. In the normal operation,
the eject button should be used to unload the tray. Make sure the power of the drive is turned off and wait more than one minute till the disc
rotation is stopped when access the eject hole.
• Blinks 1x and then repeats
• Blinks 2x and then repeats
• Blinks 3x and then repeats