Pioneer DVR-A03 Service Manual page 82

DVR-A03
QQ
3 7 63 1515 0
Rear Panel
Pin 1
Pin 1
9
9 Digital Audio Output
This is a connector for output of digital audio signal.
Pin Name
1 GND Ground.
2 Digital Out Digital audio signal output.
0 Audio Output
This is a connector for output of analog audio.
TE
L 13942296513
This connector is compatible with `Molex 70553`, choose a suitable connection cable.
Pin Name
1 L Left channel audio output.
2 G Ground.
3 G Ground.
4 R Right channel audio output.
- Device Configuration Jumper
Switch becomes ON when short socket is put.
Make sure the power of the drive is off before changing jumper setting.
Pin # 1 is ON at the time of shipping from the plant.
Pin Name
1 MA on The drive is used in master mode.
2 SL on The drive is used in slave mode.
3 CS on Using Cable Select function.
4 Reserved.
5 Reserved.
= Host IDE Interface
This is a 40 pin I/O connector according to the ATA specifications.
~ DC Input
Pin Name
1 +12 Power supply input for DC +12 V.
2 G Ground.
3 G Ground.
4 +5 Power supply input for DC +5 V.
www
.
82
http://www.xiaoyu163.com
Pin 1
0 -
Function
Function
Function
Function
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Pin 1
=
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
Pin 1
~
0 5 8 2 9 9 4 2 8
m
9 9
9 9