Toro Z Master Professional 6000 74922 Operator's Manual page 39

5. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the Full mark
A
C
E
Figure 51
6. Start the engine and drive to a flat area.
7. Check the oil level again.
(Figure 51).
B
D
F
g027660
Changing the Engine-Oil Filter
Service Interval: Every 200 hours
Note: Change the engine-oil filter more frequently when
operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to
Engine Oil (page
2. Change the engine-oil filter
A
C
E
g027477
Note: Ensure the oil-filter gasket touches the engine,
and then an extra 3/4 turn is completed.
3. Fill the crankcase with the proper type of new oil; refer
to Changing the Engine Oil (page
39
Changing the
38).
(Figure 52).
B
D
F
3/4
Figure 52
38).
G008804