Toro Z Master Professional 6000 74922 Operator's Manual page 14

1. Check hydraulic oil every 50 operating hours.
2. Read the Operator's Manual for information on lubricating
the machine.
1. Tipping hazard on slopes—do not make sudden, tight turns;
make slow, wide turns; do not use on slopes near open water;
do not use this machine on slopes greater than 15 degrees.
125–9383
3. Check the tire pressure every 50 operating hours.
4. Read the Operator's Manual before servicing or performing
maintenance.
127–0335
2. Ramp hazard—when loading onto a trailer, do not use dual
ramps; only use a singular ramp wide enough for the machine
and that has an incline less than 15 degrees; back up the
ramp (in reverse) and drive forward off the ramp.
14