Operation With The Ir Remote Control - EuroLite LED Mini D-20 Hybrid Beam Effect User Manual

Operation with the IR Remote Control

The IR remote control allows convenient control of the integrated show programs in automatic mode or
sound-controlled mode. The display indicates the current setting. When actuating a button, always hold the
remote control in the direction of the sensor at the control unit's front or rear. There must be visual
connection between the remote control and the sensor.
Note: Control via IR remote control not possible in DMX or slave mode
Button
General Functions
~
/
► Battery
The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery
contacts prevents the battery from being discharged during storage. Prior to the first operation remove the
foil from the battery support on the rear side of the remote control. Otherwise operation of the remote control
is not possible.
If the range of the remote control decreases (3 meters as a maximum), replace the
battery. For this purpose, on the rear side of the remote control press the small bar
with the groove to the right and at the same time remove the battery support. For
operation, one 3 V button cell type CR 2025 is required. When inserting, pay
attention that the positive pole of the button cell shows upwards in the support.
Auto Mode
Speed adjustable with 0—9
Sound Mode
Speed adjustable with 0—9
Auto-LED-Program
Speed adjustable with 0—9
Auto-Strobe-Program
Speed adjustable with 0—9
Strobe on/off
Press the button once and the strobe is on, press it again and it is off
On/off
No function
Running speed of the show programs, increasing
Pause
Color selection
Function
26/30 00092113.DOC, Version 1.0