Safety And Instructional Decals - Exmark VANTAGE X Series Operator's Manual

Safety

Safety and Instructional Decals

• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
106-5517
1. Warning—do not touch the hot surface.
112-8760
1. Thrown object hazard—keep bystanders a safe distance
from the machine.
2. Cutting/dismemberment of hand or foot—stay away
from moving parts.
112-9028
1. Warning—stay away from moving parts; keep all guards
in place.
• New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
• Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
1. Thrown object hazard; cutting/dismemberment
hazard—do not operate the machine with the discharge
opening uncovered; always operate the machine with
the rear discharge deflector, discharge cover or grass
collector installed.
1. Hydraulic oil level
2. Read the Operator's
Manual.
10
114-3489
115-4212
3. Warning—do not touch
the hot surface.