Switching The Unit On/Off; General Operation; Adjusting The Louvre; Setting The Auto On/Off Time - Sandstrom SAC09C13E Instruction Manual

Switching the Unit On/Off

• Press on the unit or ON/OFF on the remote control. The Power Indicator will light up red,
indicating the unit is switched on (or in standby mode).
• To completely switch off the unit, unplug from the mains supply.

General Operation

Adjusting the Louvre

The louvre can only be adjusted when the unit is switched on.
Press SWING to initiate auto-swing. Press SWING again to stop the louvre from swinging.
• Do not adjust the louvre manually.
• Do not put objects or hands into the louvre opening.

Setting the Auto On/Off Time

You can set the unit's auto on/off time.
On the UNIT:
When the unit is switched on:
1) Press TIMER. The OFF LED will light up.
2) Input the auto off time by pressing +/–. Press TIMER to confirm. The ON LED will light up.
3) Input the auto on time by pressing +/–. Press TIMER to confirm. Both ON/OFF LEDs will
light up. The unit is now programmed to auto on/off.
When the unit is switched off:
1) Press TIMER. The ON LED will light up.
2) Input the auto on time by pressing +/–. Press TIMER to confirm. The OFF LED will light
up.
3) Input the auto off time by pressing +/–. Press TIMER to confirm. Both ON/OFF LEDs will
light up. The unit is now programmed to auto on/off.
On the REMOTE CONTROL:
1. Press TIMER ON repeatedly to select the auto on time. To confirm, stop pressing and wait for
the confirmation tone.
2. Press TIMER OFF repeatedly to select the auto off time. To confirm, stop pressing and wait
for the confirmation tone. Both ON/OFF LEDs will light up. The unit is now programmed to
auto on/off.
To change the auto on/off time setting, repeat from step 1.
To cancel the auto on/off time setting, press on the unit or ON/OFF on the remote control, or
set the timer to 0.0.
GB
27