Daikin FF-C Technical Manual page 15

1) Indoor Installation Clearance
Clearance must be provided for the indoor unit from wall and obstacles as shown in fi gure below.
Obstacles
The installation place (handling ceiling surface) must be level and the height in the ceiling is 350mm or more.
2) Outdoor Installation Clearance
Outdoor unit must be installed such that there is no short circuit of the hot discharge air or obstruction to smooth
air fl ow. Select the coolest possible place where intake air should not hotter than the outside temperature
(Max. 45°C).
ALL MODELS
Minimum Distance
If the condensing unit is operated in an atmosphere containing oils (including machine
oils), salt (coastal area), sulphide gas (near hot spring, oil refi nery plant), such substances
Min 0.5 m Min 0.5 m
Floor
300 mm
may lead to failure the unit.
A B
1000 mm
Application Information
Min 0.5 m
C D
300 mm 500 mm
12