1
2
driVer installatiOn
cOnnectinG
Pc/notebook
en
1. Driver installation
that accompanied the game,
In DirectInput mode, you will
To install the driver software, insert
ask the publisher or try both
also find the options there for the
the supplied driver CD into the CD
modes to establish which mode
vibration function; for XInput games,
drive. If the installation process does
works the best.
configure the vibration functions in
not start automatically, navigate
the game's options settings. Please
4. D-pad mode
to your CD drive using Windows
®
note, vibration functions only work
In DirectInput mode, press the XEOX
Explorer and start the program by
if supported by the game and the
button to switch between the two
clicking Setup.exe. You will need to
relevant option is enabled in the
digital D-pad modes. If the upper two
install the driver to use the vibration
game's options settings.
LEDs are not lit, coolie-hat mode is
function with some games.
enabled. If these LEDs are lit, the
Always use the latest driver for the
D-pad and left analog stick functions
best possible performance. You can
are swapped.
download it from the SPEEDLINK
5. Rapid-fire function
website at www.speedlink.com.
The rapid-fire function allows a
2. connecting
button to fire multiple times in rapid
Plug the gamepad into a free USB
succession when pressed. To do
port on your PC. The operating
this, keep the Rapid button held
system will detect the device
depressed and press the button you
automatically and it will be ready to
want to assign this function to.
use a few seconds after that.
If you press this button again while
3. Xinput and Directinput
pressing and holding the Rapid
You can switch between the
button, the button will switch from
gamepad's two operating modes
rapid-fire to auto-fire mode. In doing
using the switch on the back: 'X' for
so, the button will fire automatically
XInput (for the majority of the latest
in rapid succession when pressed
games) and 'D' for DirectInput (for
once. To reset the button back to
all older and some newer games).
single-fire mode, press and hold the
In XInput mode, all four of the
Rapid button and press the relevant
gamepad's LED will light up.
button again.
Set the gamepad to the desired
6. Settings
mode before starting a game.
Test the gamepad's functions by
Switching during gameplay may stop
opening the Windows
®
Control Panel
the game identifying the controller
and going to the Game Controllers
correctly; if this happens, restart the
option (Windows
®
7/Vista
®
/XP).
game. Please consult the manual
intended use
Conformity notice
Technical support
This product is only intended as an input
Operation of the device (the devices) may
Having technical problems with this
device for connecting to a computer.
be affected by strong static, electrical or
product? Get in touch with our Support
Jöllenbeck GmbH accepts no liability
high-frequency fields (radio installations,
team – the quickest way is via our website:
whatsoever for any damage to this product
mobile telephones, microwaves,
www.speedlink.com.
or injuries caused due to careless, improper
electrostatic discharges). If this occurs, try
or incorrect use of the product or use of the
increasing the distance from the devices
product for purposes not recommended by
causing the interference.
the manufacturer.
3
XinPut and directinPut
sWitcH
X
D
De
1. Treiberinstallation
ein Spiel starten. Das Umschalten im
betätigen Sie sie ein weiteres Mal
Legen Sie die mitgelieferte Treiber-
laufenden Spiel kann dazu führen,
bei gedrückter „Rapid"-Taste.
CD in das CD-Laufwerk ein, um die
dass der Controller von diesem nicht
6. einstellungen
Treibersoftware zu installieren. Sollte
mehr korrekt erkannt wird; in diesem
Die Funktion des Gamepads
die Installation nicht automatisch
Fall starten Sie bitte das Spiel neu.
können Sie in der Windows
-
®
beginnen, wählen Sie im Windows
®
Mit welchem Modus ein Spiel am
Systemsteuerung im Abschnitt
Explorer Ihr CD-Laufwerk und
besten funktioniert, erfahren Sie
„Geräte und Drucker"
starten Sie das Programm
im zugehörigen Handbuch, beim
(Windows
7/Vista
) beziehungs-
®
®
„Setup.exe". Die Installation ist
Hersteller oder durch Ausprobieren.
weise „Gamecontroller"
notwendig für die Nutzung der
4. Steuerkreuz-Modus
(Windows
®
XP) prüfen.
Vibrationsfunktion in einigen Spielen.
Betätigen Sie die „XEOX"-Taste im
Im DirectInput-Modus finden Sie
Für optimale Leistung verwenden
DirectInput-Modus, wechseln Sie
dort auch die Optionen für die
Sie bitte stets die neueste
zwischen zwei Modi für das digitale
Vibrationsfunktion; Vibrationen für
Treiberversion, die Sie auf der
Steuerkreuz (D-Pad): Leuchten
XInput-Titel konfigurieren Sie in
SPEEDLINK-Website unter
die oberen beiden LEDs nicht, ist
den jeweiligen Spieloptionen. Bitte
www.speedlink.com finden.
der Rundblickschalter-Modus aktiv.
beachten Sie, dass Vibrationen
Leuchten diese LEDs, tauschen
2. anschluss
nur dann wiedergegeben werden,
das Steuerkreuz und der linke
Verbinden Sie das Gamepad
wenn ein Spiel diese nutzt und die
Analogstick ihre Funktionen.
mit einem freien USB-Anschluss
entsprechende Funktion in den
Ihres PCs. Das Gerät wird vom
5. Schnellfeuerfunktion
Spieloptionen aktiviert ist.
Betriebssystem automatisch erkannt
Die Schnellfeuerfunktion führt
und ist nach wenigen Sekunden
eine Taste mehrfach in schneller
einsatzbereit.
Folge aus, solange diese gedrückt
wird. Halten Sie dafür die „Rapid"-
3. Xinput und Directinput
Taste gedrückt und betätigen Sie
Mit dem Schiebeschalter auf der
gleichzeitig die Taste, für welche die
Rückseite wechseln Sie zwischen
Funktion aktiviert werden soll.
den beiden Betriebsmodi des
Gamepads: „X" für XInput (für die
Betätigen Sie diese Taste bei
meisten aktuellen Spiele) und „D"
gedrückter „Rapid"-Taste erneut,
für DirectInput (für alle älteren und
wechselt sie vom Schnell- in den
einige neuere Spiele). Im XInput-
Autofeuer-Modus. Dadurch wird die
Modus leuchten alle vier LEDs des
Taste nach einmaliger Betätigung
Gamepads.
automatisch in schneller Folge
ausgeführt. Um die Taste wieder in
Bitte versetzen Sie das Gamepad in
den Einzelfeuermodus zu versetzen,
den gewünschten Modus, bevor Sie
Bestimmungsgemäßer Gebrauch
Konformitätshinweis
Technischer Support
Dieses Produkt ist nur als Eingabegerät
Unter Einwirkung von starken statischen,
Bei technischen Schwierigkeiten mit
für den Anschluss an einen Computer
elektrischen oder hochfrequenten
diesem Produkt wenden Sie sich bitte an
geeignet. Die Jöllenbeck GmbH übernimmt
Feldern (Funkanlagen, Mobiltelefonen,
unseren Support, den Sie am schnellsten
keine Haftung für Schäden am Produkt
Mikrowellen-Entladungen) kann es zu
über unsere Webseite www.speedlink.com
oder Verletzungen von Personen aufgrund
Funktionsbeeinträchtigungen des Gerätes
erreichen.
von unachtsamer, unsachgemäßer,
(der Geräte) kommen. Versuchen Sie in
falscher oder nicht dem vom Hersteller
diesem Fall, die Distanz zu den störenden
angegebenen Zweck entsprechender
Geräten zu vergrößern.
Verwendung des Produkts.
4
5
d-Pad MOde (directinPut)
raPid-Fire FunctiOn
Press
Fr
1. installation du pilote
vous changez de mode en cours de
il suffit d'appuyer une fois sur la
Insérez dans le lecteur de CD-
jeu, il est possible que la manette
touche en question pour répéter
ROM le CD fourni avec le pilote à
ne soit plus reconnue correctement
automatiquement sa fonction en
installer. Si l'installation ne démarre
; dans ce cas, redémarrez le jeu.
rafale. Pour ramener la touche au
pas automatiquement, cliquez sur
Pour connaître le mode le mieux
mode de tir classique, appuyez à
votre lecteur de CD-ROM dans
adapté au jeu, consultez la notice du
nouveau dessus tout en maintenant
l'Explorateur de Windows
®
et lancez
jeu, demandez conseil au fabricant
la touche « Rapid » enfoncée.
le programme « Setup.exe ». Il est
ou bien essayez alternativement les
6. paramètres
nécessaire d'installer le pilote pour
deux modes.
Vous pouvez vérifier le bon
bénéficier de la fonction vibration
4. Mode de la croix directionnelle
fonctionnement de la manette
dans certains jeux.
En mode DirectInput, appuyez sur
en allant dans le Panneau de
Pour un fonctionnement optimal,
la touche « XEOX » pour basculer
configuration Windows
dans
®
utilisez toujours la dernière version
entre les deux modes de la croix
la section « Périphériques et
du pilote que vous trouverez sur le
directionnelle (D-pad) : lorsque les
imprimantes » (Windows
®
7/Vista)
site SPEEDLINK à l'adresse
deux voyants du haut sont éteints, le
ou « Contrôleurs de jeu »
www.speedlink.com.
mode vue panoramique est activé.
(Windows
®
XP).
Lorsque ces voyants sont allumés,
2. raccordement
En mode DirectInput, vous y
la croix directionnelle et le stick
Reliez la manette à une prise
trouverez également les options
analogique gauche inversent leurs
USB libre de votre ordinateur.
de réglage de la fonction vibration
fonctions.
Le périphérique est détecté
; les vibrations pour les jeux XInput
automatiquement par le système
5. Fonction de tir rapide
doivent être configurées dans les
d'exploitation et prêt à l'emploi en
options du jeu en question. Les
La fonction de tir rapide répète
quelques secondes seulement.
en rafale la fonction d'une touche
vibrations ne sont restituées que
donnée tant que vous maintenez
si le jeu les prend en charge et si
3. Xinput et Directinput
cette touche enfoncée. Pour
la fonction correspondante a été
L'interrupteur coulissant au dos
cela, maintenez la touche «
activée dans les options du jeu.
vous permet de commuter entre
Rapid » enfoncée et actionnez
les deux modes de la manette : «
simultanément la touche pour
X » pour XInput (convient pour la
laquelle vous souhaitez activer cette
plupart des jeux actuels) et « D »
fonction.
pour DirectInput (pour tous les jeux
anciens et quelques jeux récents).
Si vous appuyez à nouveau sur
Les quatre voyants de la manette
la touche en gardant la touche
sont allumés en mode XInput.
« Rapid » enfoncée, elle passe
du mode de tir rapide au mode
Réglez la manette sur le mode
de tir automatique. Dans ce cas,
souhaité avant de lancer un jeu. Si
Utilisation conforme
Indication de conformité
assistance technique
Ce produit est uniquement destiné à être
La présence de champs statiques,
En cas de difficultés techniques concernant
utilisé comme dispositif de pointage sur un
électriques ou à haute fréquence intenses
ce produit, veuillez vous adresser à notre
ordinateur. La société Jöllenbeck GmbH
(installations radio, téléphones mobiles,
service d'assistance technique. Le moyen
décline toute responsabilité en cas de
décharges de micro-ondes) peut perturber
le plus rapide consiste à le contacter par le
dégradations du produit ou de blessures
le bon fonctionnement de l'appareil (ou des
biais de notre site Web www.speedlink.com.
corporelles dues à une utilisation du
appareils). Dans ce cas, essayez d'éloigner
produit inconsidérée, incorrecte, erronée
les appareils à l'origine des perturbations.
ou contraire aux instructions données par
le fabricant.
6
settinGs
Press
(+ Fire ButtOn)
Xinput mode
directinput mode
nl
1. Stuurprogramma-installatie
Zet de gamepad in de gewenste
automatisch vuren. Dat betekent dat
Plaats de meegeleverde cd-
modus, voordat u een game start.
de knop nadat u er één keer op hebt
rom in het cd-romstation om de
Als u tijdens een game overschakelt
gedrukt, snel achter elkaar wordt
stuurprogrammatuur te installeren.
op een andere modus, kan het
uitgevoerd. Als u de knop weer wilt
Als de installatie niet automatisch
gebeuren dat de game de controller
terugschakelen naar de normale
wordt gestart, selecteert u in de
niet meer correct herkent; in dat
vuurmodus, drukt u opnieuw op
Windows
®
-Verkenner uw
geval dient u de game opnieuw
de knop terwijl u de knop „Rapid"
cd-romstation en start u het
op te starten. In welke modus een
ingedrukt houdt.
programma „Setup.exe". De
game het beste werkt, staat in het
6. instellingen
installatie is noodzakelijk om gebruik
bijbehorende handboek; u kunt het
U kunt in het Configuratiescherm
te maken van de trilfunctie in
ook navragen bij de fabrikant of het
van Windows
®
bij „Apparaten en
sommige games.
uitproberen.
printers" (Windows
7/Vista
), resp.
®
®
Gebruik de nieuwste versie van
4. Stuurkruismodus
„Spelbesturingen" (Windows
®
XP)
het stuurprogramma voor optimale
Drukt u op de „XEOX"-knop in
controleren of de gamepad werkt.
prestaties; die versie staat op de
DirectInput-modus, dan wisselt u
In de DirectInput-modus staan daar
website van SPEEDLINK:
tussen twee modi voor het digitale
ook de opties voor de trilfunctie;
www.speedlink.com.
stuurkruis (D-Pad): Als de beide
Trilfuncties voor XInput-games
bovenste LED's zijn gedoofd, is
2. aansluiten
configureert u steeds bij de opties
de rondkijkmodus actief. Als deze
Sluit de gamepad aan op een vrije
van de game. Opties voor de
LED's branden, is de functie van het
USB-poort van de computer.
trilfunctie worden echter alleen
stuurkruis en de linker analoge stick
weergegeven als ze relevant zijn
Het apparaat wordt automatisch
verwisseld.
voor een game en als in die game
herkend door het besturingssysteem
5. Snelvuurfunctie
de desbetreffende functie bij de
en is na een paar seconden gereed
Met behulp van de snelvuurfunctie
instellingen is ingeschakeld.
voor gebruik.
kunt u de functie van een knop
meerdere keren achter elkaar
3. Xinput und Directinput
Met de schakelaar op de achterkant
uitvoeren zolang u de knop ingedrukt
kunt u tussen de beide werkstanden
houdt. Houd daartoe de „Rapid"-
van de gamepad wisselen: „X" voor
knop ingedrukt en druk tegelijkertijd
op de knop waaraan u de functie wilt
XInput (voor de meeste huidige
games) en „D" voor DirectInput
toewijzen.
(voor alle oudere en enkele nieuwe
Drukt u opnieuw op deze knop
games). In de XInput-modus
terwijl u de knop „Rapid" ingedrukt
branden alle vier de LED's van de
houdt, dan schakelt u over van de
gamepad.
snelvuurfunctie naar de functie voor
Gebruik conform de doelstellingen
Opmerking over de conformiteit
Technische ondersteuning
Dit product is uitsluitend geschikt als
Velden met een sterke statische, elektrische
Neem bij technische problemen met dit
invoerapparaat voor aansluiting op een pc.
of hoogfrequente lading (radiotoestellen,
product contact op met onze ondersteuning;
Jöllenbeck GmbH is niet aansprakelijk voor
draadloze telefoons, ontladingen van
u kunt hen het snelste bereiken via onze
schade aan het product of persoonlijk letsel
microgolven) kunnen van invloed zijn op de
website www.speedlink.com.
als gevolg van ondoordacht, ondeskundig,
werking van het apparaat (de apparaten).
onjuist gebruik van het product of gebruik
Probeer in dat geval de afstand tot de
dat niet overeenstemming is met het door
storende apparaten te vergroten.
de fabrikant aangegeven doel van het
product.
XeOX
GaMePad – usB
sl-6556-Bk
Quick install Guide
Vers. 1.0
en / de / Fr / nl / es / it / tr / ru
Technical SupporT
Having technical problems with this product? Get in touch with our Support team –
the quickest way is via our website: www.speedlink.com.
©2012 Jöllenbeck GmbH. All rights reserved. SPEEDLINK
®
, the SPEEDLINK word mark and the SPEEDLINK
swoosh are registered trademarks of Jöllenbeck GmbH. Windows, Windows XP, Windows Vista and
Windows 7 are registered trademarks of Microsoft Corporation in the United States and/or other countries.
All trademarks are the property of their respective owner. Jöllenbeck GmbH shall not be made liable for any
errors that may appear in this manual. Information contained herein is subject to change without prior notice.
JÖLLENBECK GmbH, Kreuzberg 2, 27404 Weertzen, GERMANY
Need help?
Do you have a question about the XEOX and is the answer not in the manual?
Questions and answers