Input Selection And Av Connections; Input Selection; Input Signal Selection - Toshiba Regza XV55 Series Manual

Input selection and AV
connections
Defining the INPUT and OUTPUT sockets so that
the television recognises connected equipment.
See page 8 for a clear view of the back connection
recommendations.
Most media recorders and decoders send a signal through the
SCART lead to switch the television to the correct Input socket.
Alternatively press the external source selection button
until the picture from connected equipment is shown.
This button must be used to view equipment connected using
the COMPONENT VIDEO INPUT (EXT3).
o
An S in the display e.g. 2S (EXT 2S), indicates the input is set
for an S-Video signal.

Input selection

Use the Input Selection if the television does not switch over
automatically.
a
At any time by pressing
showing all stored programmes and external
B
equipment. Use and
select.
DTV
HDMI1
HDMI2
HDMI3
PC
ATV
NOTE: When in digital mode ATV cannot be
selected, in analogue mode DTV cannot be selected.
To switch between DTV and ATV press the ATV/DTV
button.
HDMI™ displays equipment connected to Input HDMI
on the back of the television.
PC displays a computer connected to Input RGB/PC on
the back of the television.
o
o
a list will appear on screen
Q
b
to highlight and to
1
2
3C

INPUT signal selection

This specifies the type of signal going into SCART 2 (EXT2) on
the back of the television. Please refer to the manufacturers
instructions for the connected equipment.
a
In the SET UP menu press
highlighted, then press
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
Back
MENU
b
C c
With or select either AV or S-VIDEO as the
required input for EXT2.
PC/HDMI1 audio
HDMI1 audio
Lip Sync
EXT2 input
Woofer
Back
MENU
If the colour is missing try the alternative setting.
35
CONTROLS AND FEATURES
b
until AV connection is
Q
.
SET UP
English
UK
OK
OK
OK
OK
Watch TV
EXIT
AV connection
PC
Digital
On
AV
Internal
Watch TV
EXIT
1/2