Advertisement
• pSeries 650 (7038-6M2) through the 7311-D20 I/O
Drawer
• 9111
• 9112-265
• 9113-550
• 9114-275
• 9117-570
• 9124-720
The drive features of the 7212 Model 102 are supported
for attachment to the PCI-X Dual Channel ULTRA320 SCSI
Adapter (#5710). This adapter is used in the following
pSeries models:
• pSeries 630 (7028-6C4,6E4) through the 7311-D10 I/O
Drawer
• pSeries 650 (7038-6M2)
• pSeries 655 (7039-651)
• pSeries 670 (7040-671) through the 7040-61D I/O
Drawer
• pSeries 690 (7040-681) through the 7040-61D I/O
Drawer
• 9119-590
• 9119-595
The drive features of the 7212 Model 102 are supported
for attachment to the PCI-X Dual Channel ULTRA320 SCSI
RAID Adapter (#5711).
following pSeries models:
• pSeries 630 (7028-6C4, 6E4) through the 7311-D10 I/O
Drawer
• pSeries 650 (7038-6M2, 651)
• pSeries 670 (7040-671) through the 7040-61D I/O
Drawer
• pSeries 690 (7040-681) through the 7040-61D I/O
Drawer
• 9119-590
• 9119-595
The drive features of the 7212 Model 102 are supported
for attachment to the PCI-X Dual Channel ULTRA320 SCSI
Adapter (#5712). This adapter is used in the following
pSeries models:
• pSeries 610 (7028-6C1, 6E1)
• pSeries 630 (7028-6C4, 6E4) through the 7311-D20 I/O
Drawer
• pSeries 615 (7029-6C3, 6E3)
• pSeries 650 (7038-6M2) through the 7311-D20 I/O
Drawer
• 9111-520
• 9112-265
• 9113-550
• 9114-275
• 9117-570
• 9124-720
The drive features of the 7212 Model 102 are supported
for attachment to the PCI-X Dual Channel ULTRA320 SCSI
This adapter is used in the
Adapters (#1974, #1975). These adapters are used in p5
Server Model 9123-710.
™
IBM
iSeries
Model 102
This product can be attached to an iSeries server with one
of the following features:
• PCI Magnetic Media Controller (#2768)
• PCI-X ULTRA Tape Controller (#5702)
• PCI-X RAID Controller (#5703)
• PCI-X Tape/DASD Controller (#5705)
• PCI-X ULTRA 320 Tape Controller (#5712)
For information on which PCI Controller to select, refer to
the appropriate configurator for prerequisites.
iSeries cables
SCSI cables must be specified on the initial plant order.
Refer to the Cable orders section for details.
Software requirements
pSeries and p5 servers
The Half-High LTO-2 Tape Drive features require AIX
V5.1.0 with update CD LCD4-1103-07, or later, or Linux
as listed at the end of this section.
iSeries (Models 7xx and 8xx) servers
Drive features require OS/400
models of the 9406 iSeries server.
i5 servers
Drive features require IBM i5/OS
as listed at the end of this section.
Linux support
• SUSE Linux Enterprise Server 9 for POWER
• Red Hat Enterprise Linux AS for POWER V3, or later
Compatibility: The Half-High LTO-2 Tape Drive (#1109)
feature is read and write compatible with Ultrium 1 tape
cartridges.
Limitations: The 7212 Storage Enclosure, with split SCSI
bus feature (#1208 or #9206), must be connected at the
end of the bus.
This is required because each of the
drives in the 7212, with split SCSI bus feature, is internally
terminated.
When using two 7212 Storage Enclosures per adapter
port, the first 7212 must have the single SCSI bus feature
(#9207).
The second 7212 may have either the single
SCSI bus feature (#9207) or the split SCSI bus feature
(#1208 or #9206)
Note: 7212 Storage Enclosures, manufactured before
March 2002, had a single SCSI bus equivalent to feature
number 9207.
Planning information
Customer responsibilities:
customer responsibility. Detailed planning information is
in the 7212 Model 102 Setup and Operator Guide
(SA41-0054).
Customers are responsible for obtaining the appropriate
SCSI adapters and cables for system attachment.
Customers are also responsible for ordering media.
-3-
®
and AS/400
support of the 7212
®
V5.2, or later, on all
™
V5.3, or later, or Linux
™
Physical
planning
®
™
is
a
105-397
Advertisement
