Routing - Yamaha PX10 Reference Manual

 ROUTING
Selects the route of the input signal from four types: DUAL, PARALLEL, SINGLE, and
SUM.
• DUAL (Dual mode):
Sends the input signal from channel A to speaker A, and sends the input signal from
channel B to speaker B.
Input
[INPUT] A
processor A
VOL
Input
[INPUT] B
processor B
VOL
• PARALLEL (Parallel mode):
Sends the input signal from channel A to both speaker A and speaker B. Channel A and
channel B can be set differently.
Input
[INPUT] A
processor A
VOL
Input
[INPUT] B
processor B
Speaker
[SPEAKERS] A
processor A
Speaker
[SPEAKERS] B
processor B
Speaker
[SPEAKERS] A
processor A
Speaker
[SPEAKERS] B
processor B
BAL
Panel Operation — CONFIG WIZARD screen (Advanced mode)
• SINGLE (Single mode):
Sends only the input signal from channel A.
Input
[INPUT] A
processor A
VOL
[INPUT] B
• SUM (Sum mode):
Mixes and sends the input signals from channel A and channel B.
Input
[INPUT] A
processor A
Input
[INPUT] B
processor B
VOL
NOTE
The volume knob is available only for control of channel A. The volume of channel B is linked to
that of channel A.
NOTE
• Depending on the SP TYPE (speaker type,
details, refer to "PX amplifier available system configurations" (page
• Regarding input processors and speaker processors, refer to
(page 7). For setting instructions, refer to
Speaker
[SPEAKERS] A
processor A
Speaker
[SPEAKERS] B
processor B
BAL
Speaker
[SPEAKERS] A
processor A
Speaker
[SPEAKERS] B
processor B
BAL
page 22), the menu choices may be limited. For
6).
"Signal processing in PX amplifier"
"TUNING screen" (page 25).
PX10/PX8/PX5/PX3 Reference Manual
23