Config Wizard Screen (Advanced Mode); Wizard Mode; Sp Type (Speaker Type) - Yamaha PX10 Reference Manual

CONFIG WIZARD screen (Advanced mode)

Using the Configuration Wizard here enables you to easily set more advanced functions.
WARNING
The volume changes depending on the setting. Carry this out with the volume lowered for
safety.
NOTE
To return to a previous parameter setting, press the [
 WIZARD MODE
Select a parameter status to start settings.
• EDIT CONFIG:
Changing the current setting
• NEW CONFIG:
Making a new setting
] (back) key.
Panel Operation — CONFIG WIZARD screen (Advanced mode)
 SP TYPE (speaker type)
Selects a combination of speakers for connection.
• FULL+FULL:
When connecting full-range speakers to the [SPEAKERS] terminals of both channels A
and B.
• SUB+SUB:
When connecting subwoofers to the [SPEAKERS] terminals of both channels A and B.
• FULL+SUB:
When connecting a full-range speaker to the [SPEAKERS] of channel B and a subwoofer
to channel A.
• BI-AMP:
When connecting low range of a bi-amp speaker to the [SPEAKERS] of channel A and
high range to channel B.
• FULL (MONO):
When connecting a full-range speaker driven in Power Boost mode to the [SPEAKERS]
terminal of channel A (PX5 and PX3 only).
• SUB (MONO):
When connecting a subwoofer driven in Power Boost mode to the [SPEAKERS] terminal
of channel A (PX5 and PX3 only).
NOTE
Refer to "PX amplifier available system configurations" (page 6)
in "ROUTING" (page 23).
for details on combinations listed
22
PX10/PX8/PX5/PX3 Reference Manual