Philips 109P2 CM25 GSIII Service Manual page 62

62
109P2 GS3 CM25
9
Go to cover page
.
00-08-01
JACK LIN
Back
GENERAL PRODUCT SPECIFICATION
3.6 Degaussing
An automatic degaussing circuit is provided and required no intervention.
The degaussing is activated at the time of switch-on and power saving
wake up or switch-on again after switched-off for longer than 30 minutes.
Manual degaussing is provided to eliminate any color impurity.
3.7 Requirement for low emission
(1) Electro static potential : < 0.5 KV
(2) Alternating Elec. field
ELF 5 - 2 Khz
VLF 2 - 400 KHz
(3) Magnetic field
ELF 5 - 2 Khz
VLF 2 - 400 Khz
3.8 Power management
The power consumption and the status indication of the set
with power management function are as follows,
STATUS Horizontal Vertical
On Pulse
Stand-by No Pulse
Suspend Pulse
Power off No Pulse
Entering from ON state to Power saving state must has 5
- 10 second time delay. It must awake from Suspend
state to On state within 3 seconds.
According to VESA power saving signalling.
TCO99 power saving requirement
EPA energy star requirement
E2000
19" AUTO SCAN CMTR
TYPE : 109P20/00C-CM25+109P2
BRAND : PHILIPS
00-08-01
: 10.0 V/M
: 1.0 V/M
: 200 nT
: 25 nT
Power Spec LED
Pulse as normal on
Pulse < 10 W
No Pulse < 10 W
No Pulse < 3 W Amber
590
31
Green
Yellow
Yellow
8639 000 10535
15
Forward