Important Safety Notice - Philips 109P2 CM25 GSIII Service Manual

2
109P2 GS3 CM25
9
Go to cover page
Proper service and repair is important to the safe, reliable operation
of all Philips Company** Equipment. The service procedures
recommended by Philips and described in this service manual are
effective methods of performing service operations. Some of these
service operations require the use of tools specially designed for
the purpose. The special tools should be used when and as
recommended.
It is important to note that this manual contains various CAUTIONS
and NOTICES which should be carefully Read in order to minimize
the risk of personal injury to service personnel. The possibility exists
that improper Service methods may damage the equipment. It also is
important to understand that these CAUTIONS and NOTICES ARE
NOT EXHAUSTIVE. Philips could not possibly know, evaluate and
advise the service trade of all conceivable ways in which service
might be done or of the possible hazardous consequences of each
way. Consequently, Philips has not undertaken any such broad
evaluation. Accordingly, a servicer who uses a service procedure or
tool which is not recommended by Philips must first satisfy himself
thoroughly that Neither his safety nor the safe operation of the
equipment will be jeopardized by the service method selected.
* * Hereafter throughout this manual, Philips Company will be
referred to as Philips.
WARNING
Critical components having special safety characteristics are
identified with a by the Ref. No. in the parts list and enclosed
within a broken line* (where several critical components are grouped
in one area) along with the safety symbol
exploded views.
Use of substitute replacement parts which do not have the same
specified safety characteristics may create shock, fire, or other
hazards.
Under no circumstances should the original design be modified or
altered without written permission from Philips. Philips assumes no
liability, express or implied, arising out of any unauthorized
modification Of design.
Servicer assumes all liability.
* Broken Line
Back

Important Safety Notice

on the schematics or
FOR PRODUCTS CONTAINING LASER :
Invisible laser radiation when open.
DANGER-
AVOID DIRECT EXPOSURE TO BEAM.
Use of controls or adjustments or
CAUTION-
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
The use of optical instruments with this
CAUTION-
product will increase eye hazard.
TO ENSURE THE CONTINUED RELIABILITY OF THIS
PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S
REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR
PART NUMBERS IN THE PARTS LIST SECTION OF THIS
SERVICE MANUAL.
Forward