Installation; Front View - Philips 109P2 CM25 GSIII Service Manual

109P2 GS3 CM25
4
Go to cover page

Front View

Power button switches your monitor on.
OK button which when pressed will take you to
the OSD controls
Contrast hotkey. When the UP arrow is pressed,
the adjustment controls for the CONTRAST will
show up.
UP and DOWN buttons are used when adjusting
the OSD of your monitor
Brightness hotkey. When both the LEFT and
RIGHT arrows are pressed at the same time,
then the adjustment controls for BRIGHTNESS
will show up.
LEFT and RIGHT buttons, like the UP and
DOWN buttons, are also used in adjusting the
OSD of your monitor.
By pressing both the UP and OK buttons, you
can easily access the Input Signals A and/or B.
Back
Front View and Back View
Front View
D-Sub Port - Attach the D-Sub connector that comes with your
1.
monitor here. Other end connects to your PC.
Power in - Attach power cable here.
2.
USB Port - Attach your USB Upstream cable here. Connect the
3.
other end to your USB hub or your PC's USB connector.
BNC Connectors - Attach the connectors here to get the best video
4.
performance from your monitor
Forward