Advertisement
FOR RANGER AND RZR MODELS (DASH MOUNT)
1. Place audio mount base (6) at required location on
the passenger side dash panel and use as template
to drill hole of dia 5/16" as shown in figure.
NOTE: Ensure audio mount assembly installed on
dash will not obstruct vehicle operation and driver's
vision.
2. Mount audio mount base (6) with four tuflok
rivets (12) on the dash panel as shown.
3. Snap fit bluetooth speaker (4) and strap (8) on to the
audio mount base (6) as shown in figure.
P/N 9925685 Rev 01 09/14 Page 8 of 8
12
8
4
Advertisement
