3. Align audio mount bracket (5) on the pod (B) and
use as template to drill the holes (E) of dia 5/16" as
shown in figure.
4. Fasten audio mount bracket (5) with audio mount
base (6) using four screws (10) and nyloc nuts (11).
Tighten screws until snug.
5. Snap fit bluetooth speaker (4) and strap (8) on to the
audio mount assembly as shown in figure.
P/N 9925685 Rev 01 09/14 Page 3 of 8
B
E
5
10
11
8
6
5
4