Advertisement
6. Align and Install audio mount assembly using two
tuflok rivets (12) as shown in figure.
7. Use rubbing alcohol, pledge or other temporary
lubricant on the rubber gasket, both sides. Push
back bezel and cluster assembly (A) onto the pod
as shown in figure.
8. Re-install front pod (C) by fastening six screws removed in Step 2.
Tighten screws to torque 10 in-lbs. (1.13 Nm).
FOR SPORTSMAN 570 AND SPORTSMAN 570 TOURING
1. Place the vehicle in "PARK" and turn the key to "OFF" position. Remove the key from the vehicle.
2. Push out cluster with bezel assembly (F) by hand
from upper pod (G). If Bezel separates from gauge
don't be alarmed, you will snap it back into place in
a later step. See figure.
P/N 9925685 Rev 01 09/14 Page 4 of 8
12
A
F
G
Advertisement
