3. If you cannot remove the cluster by hand, consider
removing the upper pod (G) by removing three
screws (H) as shown in figure.
4. Align audio mount bracket (7) with pod (G) and use
as template to drill the holes of dia 5/16" as shown
in figure.
5. Fasten audio mount bracket (7) with audio mount
base (6) using four screws (10) and nyloc nuts (11).
Tighten screws until snug.
P/N 9925685 Rev 01 09/14 Page 5 of 8
10
11
G
H
7
G
6
7