Advertisement
6. Align and Install audio mount bracket assembly on
the pod using two tuflok rivets (12) as shown in
figure.
7. Use rubbing alcohol, pledge or other temporary
lubricant on the rubber gasket, both sides.
Push back bezel and cluster assembly (F) to fix onto
the upper pod as shown in figure.
8. Snap fit bluetooth speaker (4) and strap (8) on to the
audio mount bracket assembly as shown in figure.
9. Re-install upper pod (G) by fastening three screws removed in Step 2.
Tighten screws to torque 10 in-lbs. (1.13 Nm).
P/N 9925685 Rev 01 09/14 Page 6 of 8
12
8
F
4
Advertisement
