Sony WEGA kv-da29 Operating Instructions Manual page 8

continued
The selected channel will appear on
the screen.
2) Press 2+/– to select the new
program number position for your
selected channel, then press t.
3) Repeat steps b) 1) and 2) if you wish
to change the order of the other
channels.
c) Press MENU to go to the next menu.
4
Press 2 +/– to adjust the bars on the top
and bottom of the menu if they are
slanted, then press t.
"Picture V-Position" menu appears.
5
If the upper and lower bars are not
equally positioned to the top and
bottom of the screen, press 2+/– to
adjust them, then press t.
If no adjustment is necessary, then press t.
6
Press 2 +/– to select "No", then press t.
This menu will not appear again the next
time you turn on the TV by pressing !.
To allow this menu to appear again, select
"Yes", then press t.
Tips
• You can immediately go to the end of the "Initial Setup" menu by pressing MENU.
• You can also set up your TV by using the menu system (see page 16).
• You can also preset the channels automatically by pressing the MENU (AUTO PROG) button
on the TV front panel for about five seconds.
Notes
• Before adjusting "Picture Rotation" and Picture V-Position", keep external speakers or other
electrical equipment away from the TV. The magnetic disturbance from these equipments or
the direction of the earth's magnetic field may affect the TV.
• You cannot adjust "Picture Rotation" and "Picture V-Position" when high-definition (1080i,
720p) signals are input.
8
Installation
Program Sorting
Program:
01 01
02
03
04
Select new position
Picture V-Position