Oki MB441 User Manual page 155

(3) When WPA-EAP or WPA2-EAP is
selected:
a) When [WPA-EAP] or [WPA2-EAP] is
selected, [Encryption type] is displayed.
b) In [Encryption type], select the
encryption type (TKIP or AES) set in the
wireless AP that you want to connect to.
When all of the settings for basic settings
7
and security settings are completed,
press the [Send] button at the bottom
left of the Web screen, and the settings
are reflected. It may take up to a minute
to connect to the wireless AP. If the
connection fails, either reconfigure the
wireless settings from the operation
panel, or switch to wired LAN from the
operation panel, and reconfigure the
wireless settings from the Web.
Configuring the wireless LAN from the Web Page (MB451w/MB471w only)
- 155 -
8