Attaching The Hand Strap - Sea&Sea RDX-750D Instruction Manual

Attaching the Hand Strap

1
Put the hand strap through the
hand strap eyelet on top of the
housing as shown
2
Put the hand strap through the
hand strap eyelet on bottom of
the housing as shown
Ensure a good grip, then fasten the
velcro.
Make sure to attach at least 2/3 of
the velcro's length.
Hold the equipment by the housing
body when carrying it. Carrying the
equipment by holding the strap may
cause it to fall and being damaged.
How to use the Hand Strap
Pass your right hand between the
hand strap and the housing, then
hold onto the housing body while
grasping the buckle part.
When shooting, support the bottom part
of the housing/port with your left hand,
and hold the housing firmly with both
hands.
CAUTION
Be careful not to touch the glass surface of the port glass with your
left hand (fingers).
E-15
③
④
②
③
①
②
①
④