Shot Of Steam; Vertical Steam Ironing - Breville vin276 Instruction Manual

Shot of Steam

When using the shot of steam function the fabric setting must be either WOOL, COTTON,
DENIM or LINEN. If you select any other fabric type, your iron will not produce steam.
Wait for several seconds between each press of the steam button.
Press the shot of steam button whenever you have a stubborn crease that needs extra
steam. Steam will burst from the holes in the soleplate into the fabric.

Vertical Steam Ironing

Never iron garments when they are being worn.
Your iron can be used for vertical steam ironing. This process can be applied to curtains,
dresses on hangers etc.
1. Fill your iron with water.
2. Plug your iron into the mains supply and switch on.
3. Select the desired fabric setting using the temperature select buttons. For steam
ironing, the fabric setting must be either WOOL, COTTON, LINEN or DENIM. If you
select any other fabric type, your iron will not produce steam.
Note: When the iron is in the steam range, the steam icon (
display. Note that less volume of steam is produced on the WOOL and COTTON
fabric settings and more steam is produced on the LINEN and DENIM settings.
4. Your iron will begin to heat up and the temperature indicator icon ( ) will flash. The
handle of your iron will light up blue.
5. When the selected temperature has been reached, your iron will beep once, the
temperature indicator icon will stop flashing and the handle will light up red. Your iron
is now ready to use.
6. Hold the iron 15cm (6 inches) from the fabric.
7. Press the shot of steam button. The steam will penetrate the fabric removing the
creases. To apply more steam press the shot of steam button again.
using your iron
) will appear on the
9