Table of Contents
Advertisement
using your iron
Ironing without steam
If you intend to dry iron fabrics, there is no need to fill the water tank. However, if water is
already in the water tank, you do not need to empty it.
1. Set the steam control to the no steam position (0).
2. Plug your iron into the mains supply and switch on.
3. Select the desired fabric setting using the temperature select button.
4. Your iron will begin to heat up and the temperature indicator icon ( ) will flash. The
handle of your iron will light up blue.
5. When the selected temperature has been reached, your iron will beep once, the
temperature indicator icon will stop flashing and the handle will light up red. Your iron
is now ready to use.
Steam ironing
During steam ironing, if you do not allow the iron to reach the selected
temperature, water may drip from the soleplate.
It is recommended that for harder to iron fabrics such as cotton and linen, steam should
be used when ironing. Steam should never be used on delicate fabrics like nylons,
acrylics and synthetics.
1.
Fill your iron with water.
2.
Plug your iron into the mains supply and switch on.
3.
Select the desired fabric setting using the temperature select buttons. For steam
ironing, the fabric setting must be either WOOL, COTTON, LINEN or DENIM. If you
select any other fabric type, your iron will not produce steam.
Note: When the iron is in the steam range, the steam icon (
display. Note that less volume of steam is produced on the WOOL and COTTON
fabric settings and more steam is produced on the LINEN and DENIM settings.
4.
Your iron will begin to heat up and the temperature indicator icon ( ) will flash. The
handle of your iron will light up blue.
5.
When the selected temperature has been reached, your iron will beep once, the
temperature indicator icon will stop flashing and the handle will light up red. Your iron
is now ready to use.
6.
Adjust the steam control for the desired steam output.
7.
Move the steam control towards the maximum steam position (3) to increase the
amount of steam, or towards the no steam position (0) to decrease the amount of
steam.
8.
The steam can be shut off at any time by setting the steam control to the no steam
position (0).
8
) will appear on the
Advertisement
Table of Contents
