10, Adjusting The Pressure Of Presser Foot; 11, Stitch Length & Reversing Lever; 12, Adjusting The Lift Of The Alternating Presser Foot - HIGHLEAD GC22618 Instruction Manual Parts Catalog

1 O.. ADJUSTING THE PRESSURE OF PRESSER FOOT (Fig.12)
Pressure of the presser foot can be adjusted by turning the pressure regulating thumb screw (A)
To increase the pressure, turn the screw to the right and to left if you decrease the pressure.
11.. STITCH LENGTH & REVERSING LEVER (Fig.13)
Adjusting the stitch adjustment bar
can set stitch length
For desired stitch length, push the
stitch adjustment bar downward.
12, ADJUSTING THE LIFT
OF THE ALTERNATING
PRESSER FOOT(Fig.14)
To alter lift, loosen the wing nut (1) and
move the link and stud assembly along the
slot-move up to raise the feeding presser foot
and push down to lower this foot. Tight wing
nut upon completion of adjustment.
- 6 -
Fig.12
Fig.13
Fig.14