13, Re-Set The Safety Clutch Mechanism; 14, Adjusting The Height Of The Feed Dog; 15, Relative Position Of The Feed Dog To Needle Plate - HIGHLEAD GC22618 Instruction Manual Parts Catalog

13, RE-SET THE SAFETY CLUTCH MECHANISM (Fig.15)
1) Retmving any
foreign matter may have lodged itself in the hook. Do not use any sharp-edged tools.
2)
Depress button CD) ,
turn
the pulley clockwise until the locking mechanism re-engages.
Fig.15
14, ADJUSTING THE HEIGHT OF THE FEED DOG (Fig.16)
The max. Height of the feed dog from the surface to the needle plate is normally 1 nnn
To adjust this height:
1)
Set the stitch length at mininnun.
2) Turn
the pulley so as to raise the feed dog to it highest position.
3) Take out cover ( 1) , Loosen the screw C 2) , adjust the height of the feed dog.
4)
Tighten the screw ( 2) after adjustment.
2
1
Imm
Fig.16
- 7 -