Titan TI-7700 Instruction Manual page 9

● Lift the backrest and find the air hose at the bottom of the backrest, and then insert
the air hose into the cable tie which binds all air hoses, finally, connect the air hose
with the air connector underneath the seat part.
Note: 2 people are required to attach the air hoses connectors on the backrest, one
person steadies the backrest and to avoid it fall down, the other person to connect the
connectors.
● Lower the backrest into the seat brackets, securely lock the flat head bolts into
sides of the seat.
Note: Carefully unwrap the armrest to avoid scratching during installation.
A: Flat Head Bolt (on the backrest)
B: Holder (on the seat part)
B
A
8