Titan TI-7700 Instruction Manual page 10

Step 2:
Attach the connecting rod and the U stay fork of the reclining actuator with the flat
head rivet and secure with a split pin as demonstrated.
A. Connecting rod ( on the backrest )
B. U stay fork of reclining actuator ( on the seat )
C. Flat head rivet
D. Split pin
A
C
B
Step 3:
Insert the wire plugs into the seat as demonstrated in below picture.
Note: Insert black to black and grey to grey, otherwise damage to the chair may be
caused. Once insert please ensure tight connected against hearing "Click" sound.
A
B
Black
Grey
D
C
Black
Grey
9