Video And Audio; Set Up Video Streams - Axis M1034-W User Manual

AXIS M1034-W Network Camera

Video and Audio

Video and Audio
The video and audio settings can be used to optimize video and audio quality. You can configure the following:
• Video stream settings. See page 20.
• Stream profiles. See page 21.
• Camera settings. See page 22.
• View area. See page 22.
• Overlay image. See page 23.
• Privacy mask. See page 24.
• Audio settings. See page 24.
• Audio clips. See page 25.

Set Up Video Streams

To set up the product's video streams, go to Video & Audio > Video Stream.
The video stream settings are divided into the following tabs:
• Image. See page 20.
• Audio. See page 24.
• H.264. See page 21.
Pixel Counter
The pixel counter shows the number of pixels in an area of the image. The pixel counter is useful in situations where there is
a specific size requirement, for example in face recognition.
The pixel counter can be used:
• When setting up a video stream, see Set Up Video Streams on page 20. Under Preview, click Open and select the Show
pixel counter option to enable the rectangle in the image. Use the mouse to move and resize the rectangle, or enter the
number of pixels in the Width and Height fields and click Apply.
• When accessing the Live View page in Internet Explorer with AXIS Media Control (AMC) in Windows. Right-click in the
image and select Pixel counter. Use the mouse to move and resize the rectangle.
Image
The default image settings can be configured under Video & Audio > Video Stream. Select the Image tab.
The following settings are available:
• Resolution. Select the default resolution.
• Compression. The compression level affects the image quality, bandwidth and file size of saved images; the lower the
compression, the higher the image quality with higher bandwidth requirements and larger file sizes.
• Mirror image. If required, the image can be mirrored.
• Rotate image. If required, the image can be rotated.
20