Analysis Setup - Dali LT7-P User Manual

LT3-P/LT7-P Thermal Image Camera User Manual

4.4.3 Analysis setup

Press Menu key to activate the main menu. Select Setup->Analysis
setup and press Confirm key to pop up the Analysis dialog box. User can set
temperature alarm, alarm temperature, alarm color, isotherm color, isotherm
temperature and isotherm width. Press Up and Down keys to choose menu
items, Left and Right keys to modify the item contents.
An alarm is triggered when a measurement cursor's measurement meets
or exceeds the Set Alarm Temp setting. All pixels above this temperature will
change to the color as set in Alarm Color. When the Alarm Color is set to
None, only the audible alarm will sound.
measurements, the selected measurement mode, Min, Max or Average will
have to meet or exceed the set temperature in order to trigger the alarm.
Temp Alarm： Off disables alarm function, On enables alarm function

and allows setting of Set Alarm Temp and Alarm Color.
Alarming Temp: Sets the alarm detection temperature. Only enabled

when Temp Alarm is set to On.
Alarming Color: Selects the color in which the alarming pixels are

displayed. If set to None, no changes are made to the screen's color.
Only enabled when Temp Alarm is set to On.
Isotherm Color：Activates the Isotherm display by displaying the

When using alarms with Area
28
DALI