RM-X170 remote commander
The remote commander can be used to operate the
audio controls. For menu operations, use the touch
Turn the source off.
Press and hold for 2 seconds to turn off the
power and display.
Turn off the monitor and button illumination.
To turn back on, press again.
This button is not supported.
Return to the previous display.
Select an equalizer curve.
Number buttons (0 – 9)
DVD playback setting buttons
These buttons are not supported.
ZAP (ZAPPIN™) (page 10)
Select a setup item, etc.
Enter the selected item.
Select the radio band.
Remove the insulation film before use.