Troubleshooting - MegaTech Hopper fly Manual

Hide thumbs

Table Of Contents

Table of Contents

If you are experiencing trouble, please follow these guidelines or call one of our

MegaTechnicians at 1-888-634-2911. We will have you up and ﬂ ying in no time!

Problem: No power to radio control transmitter or charger

Cause 1: Batteries are incorrectly installed

Solution 1: Make sure batteries are installed in the correct direction

Cause 2: Batteries are exhausted

Solution 2: Replace the batteries with new alkaline batteries

Problem: No blinking red light when charging

Cause 1: Charge nozzle is not properly plugged into the charge port

Solution 1: Make sure charging cord is securely inserted into Hopper-Fly

Cause 2: Batteries are exhausted

Solution 2: Replace ALL 8 C-Size batteries

Problem: Helicopter is not ﬂ ying high enough

Cause 1: Charger battery life is nearly exhausted

Solution 1: Replaces ALL 8 C-Size batteries

Cause 2: Battery pack is not fully charged

Solution 2: Recharge the Hopper-Fly using fresh batteries in the base

Problem: Hopper-ﬂ y crashed to the ground while landing

Cause: You may have released the throttle too quickly or too much

Solution: Try again and release the button more gradually to allow the

PART#

MTC831501

MTC831601

MTC831502

MTC831602

MTC831503

MTC831603