Replacing A Headlight Or Driving Light Bulb (+ Removing The Headlight Plate) - SHERCO se 3.0i-f Owner's Manual

REPLACING A LIGHT BULB
1
2
3
4
5
86
Removing the headlight plate
The headlight plate can be removed
very quickly.
- Unclip the left and right rubbers either
side of the forks
- Release the headlight plate upwards..
Replacing a headlight or driving
light bulb
- Remove the rubber protection 1
- Turn the pin 2,
- Withdraw the headlight unit.
- Press lightly on the bayonet bulb
- Turn counter clockwise to remove.
- Reverse the procedure to re-assemble.
- The driving light 3 is easily replaced
by removing the bulb holder from the
reflector
Always use bulbs with the right wattage.
Reassembling the headlight plate
- Reverse the removal procedure.
- Make sure that the lugs 4 on the
headlight plate are securely in the
holes 5 in the front mud guard.
WARNING