Makita 5007NH Technical Information page 8

R P 8 / 11
epair
4. Remove E-ring 3. Then, screw M5x12 and stopper pin which fasten dial on angular plate, can be removed
as illustrated in Fig. 12.
Stopper pin
Dial for 45° bevel stop
Screw M5x12
E-ring 3
Fig. 12
5. Remove screw M5x12 from angular plate, then shoulder pin 6-2 and angular guide can be separated
from angular plate as illustrated in Fig. 13.
Angular guide
Shoulder pin 6-2
Screw M5x12
Fig. 13
< 6 > Replacement of bearing box
1. Remove retaining ring 42 and tension spring 4 from blade case. And detach safety cover as illustrated
in Fig. 14.
Depth guide
Tension spring 4
Safety cover
Retaining ring 42
Fig. 14