Advertisement
R
epair
< 4 > Replacement of depth guide
1. Remove retaining ring 42 and tension spring 4 from blade case. And detach safety cover as illustrated
in Fig. 6.
2.Remove pan head screw M4x8, lever plate,
lock plate, hex nut M8, flat washer 8,
and flat washer 12 as illustrated in Fig. 7.
3.Remove 2 countersunk head screw M4x8
as illustrated in Fig. 7. Then depth guide can be
removed from base.
4.Tension spring 4 has to be hooked on the
safety cover as illustrated in Fig. 8.
Pan head screw M4x8
Hex nut M8
Lock plate
Lever plate
Flat washer 8
Flat washer 12
Depth guide
Tension spring 4
Safety cover
Retaining ring 42
Fig. 6
Removed Depth guide
Cap square neck
bolt M8x24
Countersunk
head screw M4x8
Fig. 7
Fig. 8
P 6 / 11
Depth guide
Advertisement
