fitness gear 810E User Manual page 7

AS SE M BLY S T EP 
FOOTPAD
LOWER LINK ARM
PLATE
SCREWS (C)
PEDAL ARM BRACKET
PRE-ATTACHED BOLTS
BRACKET
D) Insert LOWER LINK ARM into PEDAL ARM BRAcKET.
E) Insert PRE-ATTAcHED BOLTS into BRAcKET to attach PEDAL ARM and PRE-ATTAcHED WASHER
to LOWER LINK ARM.
F) Repeat on other side.
HARDWARE BAG FOR STEP  CONTENTS :
SCREW (A)
10 mm
Qty: 6
12
A) Open HARDWARE BAG FOR STEP 6
A) Attach FOOTPAD to LOWER LINK ARM PLATE
using 3 ScREWS (c).
B) Repeat on other side.
LOWER LINK
ARM
PRE-ATTACHED WASHER
PEDAL ARM
ASSEMBLY STEP 
A ) Open HARDWARE BAG FOR STEP 7.
B) Align LOWER HANDLEBAR with LOWER LINK ARM.
cAUTION: Be careful to keep the LOWER HANDLEBAR aligned with guide rail. Do not twist it to the left or
right while positioning it on the LOWER LINK ARM.
C) Slide SPAcER (G) through the LOWER LINK ARM and 2 TEFLON WASHERS (B) outside of the
LOWER LINK ARM.
D) Insert BOLT (E) into outside end of LOWER LINK ARM to secure LOWER HANDLEBAR.
E) Insert NUT (c) on right side of LOWER LINK ARM
F) Repeat on other side.
HARDWARE BAG FOR STEP  CONTENTS :
BOLT (E)
50 mm
Qty: 2
NUT (C)
TEFLON WASHER (B)
Qty: 2
20 mm
Qty: 4
BOLT (E)
LOWER HANDLEBAR
NUT (C)
TEFLON WASHERS (B)
LOWER LINK ARM
SPACER (G)
Qty: 2
1