How To Operate - Nostalgia Electrics MDF200 Instructions And Recipes Manual

HOW TO OPERATE

Now that you have cleaned and reassembled your AUTOMATIC
MINI DONUT FACTORY™ , making donuts is both easy and fun!
You will need:
• Cooking oil such as Canola, Peanut, Sunflower Oil or
Soybean Oil. (Never use butter, margarine or lard)
• Paper towels and a brown paper bag for absorbing excess oil from hot donuts.
HOW YOUR DONUT MAKER WORKS
Your AUTOMATIC MINI DONUT FACTORY™ will release a measured amount
of dough from the Dough Dispenser into the hot oil. The donut will be held for
seconds in a frying area before advancing to the flipping mechanism. The flipping
mechanism flips the donut over onto the Spatula Fingers. The Spatula Fingers
slowly transport the donut along to the end of the Oil Fill Pan. The Spatula Fingers
carefully rise up and out of the oil pushing the donut over a drainage ramp, which
allows the donut to slide onto the Donut Slide, where it slides down into the
Donut Bin. The entire cooking cycle for one donut takes a little over one minute
to complete. As soon as the first donut has completed cooking, the cycle will
repeat. The cycle is continuous, so make sure to turn off your AUTOMATIC MINI
DONUT FACTORY™ when you have cooked your desired amount of donuts.
MAKING DONUTS
It is essential for you to follow the included recipes EXACTLY. This unit
works best with AUTOMATIC MINI DONUT FACTORY™ packaged mix
or other drop donut mix especially created for donut machines.
Follow these instructions to make delicious mini donuts:
• Before filling the Oil Fill Pan, make sure the oil drain is closed by
turning switch in Oil Drainage Control Box to a horizontal position
(Drain Closed). Also confirm the Donut Bin is in place before
you turn on the AUTOMATIC MINI DONUT FACTORY™ .
• You may want to place a cookie sheet or tin foil under the AUTOMATIC MINI
DONUT FACTORY™ to collect any oil that may drop while making donuts.
• Plug your AUTOMATIC MINI DONUT FACTORY™ into a nearby outlet.
Note there is an instruction on the plug head that reads "this side up."
• Pour oil into the Oil Fill Pan located directly under the clear door to
the MAX fill line indicated. The oil fill pan will hold approximately 1½
cups of oil to maximum fill line. (DO NOT overfill or underfill)
• Continue to check the oil level periodically while cooking
donuts. Maintaining proper oil level is critical for proper frying,
flipping and maintaining the shape of the donuts.
7