How To Operate - Nostalgia Electrics APHBKT8 Series Operating Instructions And Recipes

HOW TO OPERATE

Before first use, clean the Top Housing, Bowl and Base by wiping it with a moist, non-
abrasive sponge or cloth and then drying it with a non-abrasive dry towel. Make sure
the Top Housing is securely attached atop the Popping Chamber before starting.
1. First, find a flat surface near an electrical outlet. Make sure your cord is away
from any water source. It is acceptable to use an extension cord if needed.
2. Plug in the appliance while switch is flipped to OFF position.
3. Remove Top Housing, and turn appliance ON by flipping the switch on the Base.
Allow the appliance to run for about 2 minutes to heat up Popping Chamber.
4. While Popping Chamber is heating, fill Kernel Cap with corn kernels (2 ounces).
NOTE: Unit pops up to 8 cups of popcorn per batch, while
the Bowl holds up to 24 cups of popcorn.
5. Turn unit OFF.
6. Pour kernels into the Popping Chamber and replace Top Housing.
7. Turn the unit ON, and soon you will hear the popping begin. Popcorn will begin
to tumble out of the opening in the Top Housing and into the bowl.
8. Once the kernels have stopped popping, turn unit OFF.
9. Tip HOT AIR POPCORN BUCKET forward to make sure that
all of the popcorn is out of the machine.
10. Repeat these steps two more times to completely fill the Bowl.
7