Declaration Of Conformity - Bosch GSB 21-2 RCT Original Instructions Manual

OBJ_BUCH-909-001.book Page 20 Wednesday, February 4, 2009 7:50 AM
20 | English
Noise/Vibration Information
Measured values determined according to EN 60745.
Typically the A-weighted noise levels of the product are: Sound pressure level 95 dB(A); Sound pow-
er level 106 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Drilling into metal:
Vibration emission value a
Uncertainty K=
Impact drilling into concrete:
Vibration emission value a
Uncertainty K=
Screwdriving without impact:
Vibration emission value a
Uncertainty K=
Tapping:
Vibration emission value a
Uncertainty K=
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
2 609 932 659 | (4.2.09)
h
h
h
h

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
22.01.2009
3 601 ... 19C 0.. 19C 5..
19C 6..
2
m/s 5.6 5.6
2
m/s 1.5 1.5
2
m/s 14.6 14.6
2
m/s 1.8 1.8
2
m/s – <2.5
2
m/s – 1.5
2
m/s – <2.5
2
m/s – 1.5
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools
19C 7..
19C 8..
5.4
1.5
15.7
2.2
<2.5
1.5
<2.5
1.5