Sony SLV-D985P AZ Operating Instructions Manual page 65

To set the "Progressive" setting
If your TV accepts progressive (480p) format signals, you will enjoy accurate colour
reproduction and high quality image.
1
Follow step 1 and 2 on page 63, then press V/v to
select "Progressive."
2
Press B/b to select "On," then press ENTER.
3
Follow the instructions appearing on the screen.
1
Ensure your TV is (525P/625P) Progressive Scan
capable.
2
Connect with Component Video Output jacks
(red/green/blue connections).
See "Use this hookup if your TV has component
video input jacks" on page 59.
3
Press B/b to select [OK] to test your video
signal.
4
If video signal appears OK, video connection is
complete. Press ENTER.
The PROGRESSIVE indicator on the unit lights up
in orange.
If picture is distorted, press O RETURN.
Check the connection (page 59).
5
Press SET UP to exit the menu.
SCREEN SETUP
TV Type
[ 4:3 Letter Box
Progressive Off
[ ]
V v B b
RETURN SET UP
SCREEN SETUP
TV Type 4:3 Letter Box
[
Progressive On
[ ]
V v B b
RETURN SET UP
SCREEN SETUP
Progressive Scan Output
1) Connect with Component Video
Output jacks.
2) Select [OK] to test your video signal.
3) If video signal appears OK,
video connection is complete.
OK CANCEL
B b
SET UP
ENTER RETURN
SCREEN SETUP
TEST SCREEN
SCREEN SETUP
If picture is OK, press [ENTER] key.
If picture is distorted, press [RETURN] key.
To Deactivate
Press [PAUSE] button on the product for
5 seconds.
ENTER RETURN
SCREEN SETUP
TV Type
4:3 Letter Box
[
Progressive [ On ]
V v B b
RETURN SET UP
continued
Screen Setup
]
]
]
65