Sony SLV-D985P AZ Operating Instructions Manual page 57

B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS* decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS
decoder function of your AV amplifier (receiver). You are not able to enjoy the
surround sound effects of this player. You must make connections using
.
B-2
* "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
DVD-VCR
B-1
to OUT AUDIO L/R
Stereo audio cord
(not supplied)
l: Signal flow
to audio input
[Speakers]
Rear (L) Subwoofer
Rear (R)
Note
• After you have completed the connection, be sure to set "Dolby Digital" to "Dolby Digital"
and "DTS" to "On" in "AUDIO SETUP" menu (page 60). If your AV amplifier (receiver) has
an MPEG audio decoder function, set "MPEG" to "MPEG" in "AUDIO SETUP" menu
(page 60). Otherwise, no sound or a loud noise will come from the speakers.
(red) (white)
and
Coaxial digital
cord (not supplied)
(red) (white)
AV amplifier (receiver) having a decoder
B-2
DIGITAL
AUDIO OUT
COAXIAL
OPTICAL
to DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical
digital input
[Speakers]
Front (L)
Front (R)
A/V Receiver hookup
and
B-1
Centre
57