Installation; Unpacking; Software Installation - Zte MF636 User Manual

Hide thumbs Also See for MF636:

Table of Contents

Check the following articles are in the package: Modem, USB Extension cable, Quick Start

Guide and User Manual.

2.2.1 Insert the SIM Card into the Modem

The SIM card is the Subscriber Interface Module provided by your Service Provider. Before

using the modem make sure the SIM card supports data services. Insert the SIM card as

shown with the gold contacts facing down and the beveled edge on the left hand side. Push

the SIM card in as far as it will go.

2.2.2 Connecting the Modem and PC

Connect the modem to your PC's USB port directly. You may alternatively use the supplied

USB cable. In most cases the single cable should suffice. However, to increase the power

delivered to the modem, use the double USB cable if required.

2.2.3 First Time Software Installation

1. The installation program should launch automatically. If this feature is disabled on

your computer, double click the Fido CD drive that appears on your desktop and

select Fido Connection Manager.

2. Press Continue on the welcome page.

3. Select a destination to install the software on the volume Macintosh HD, and then

click Continue.

4. Select Installation Type and then click Install.

5. Please enter user name and password to be authenticated, and left click OK to install.

6. Click Continue Installation and make sure that installing requires restarting the

computer.

7. Left click Close and finish software installation.

Notes:

If you have problems with the installation after the operations above, please contact

•

your service provider for help.

After the installation, select Finder > Applications and there will be a Fido

•

Connection Manager program listed. The Wireless Data Card is ready to work

normally.

2 Installation

Table of Contents